Nordik HVLS SUPERBLADE

50,000.00

SKU: 12345-2 Categories: ,

Description

HVLS (High Volume Low Speed) ceiling fans designed and made in Italy, equipped with maintenance-free EC (brushless) Direct Drive motors. These motors eliminate the need for a gearbox, reducing noise and failure points.

Inspired by aircraft wings and made of extruded aluminum, its 5 aerofoil profile blades reduce resistance and allow greater angulation, eliminating the need for a large number of blades. This provides increased air flow at lower revs, resulting in considerable energy savings.

Thanks to these characteristics, the SUPER BLADE line achieves high performance, low consumption and a silent operation.

Tamaños HVLS

USE IN HOT ENVIRONMENTS

High temperatures and high levels of relative humidity limit environmental comfort and in some cases even affect the productivity of the occupants. Under normal conditions, the human body feels the need to release heat from ambient temperatures above 23 ° C.

SUPERBLADE helps to ventilate and homogenize large spaces, offering the necessary comfort in environments such as warehouses, manufacturing plants, event spaces, etc.

USE IN COLD ENVIRONMENTS

Hot air, being less dense than cold air, is concentrated near the ceiling, giving rise to a phenomenon known as “stratification”.

Using HVLS fans allows hot air to be pushed down by mixing it with cold air (“de-stratification”). The use of SUPERBLADE in cold environments guarantees a suitable and homogenized environment, generating significant energy savings.

CONTROLS:

ANALOGIC CONTROL UNIT (POT): Potentiometer that allows adjusting the speed of the SUPERBLADE.

DIGITAL CONTROL VORT T: Digital unit that allows the control of up to 20 SUPERBLADE in manual or automatic mode, depending on the temperature measured by the integrated sensor or the wind speed measured by the anemometer.

** DIGITAL CONTROL VORT T: AVAILABLE UNDER SPECIAL REQUEST

You can download the product brochure at the following link:

 

 

 

 

 

 

Download brochure (Spanish):

En Stock

AERODYNAMIC BLADES

Inspired by the aeronautical world, made of lightweight extruded aluminium and equipped with winglets to reduce drag every occasion or need, providing you well-being without the use of chemicals or high temperatures present in traditional solutions

VORT T CONTROL MODULE

Automatically control up to 10 fans depending on temperature and wind flow intensity (optional).

PERFORMANCE

High flow at low revolutions, with extremely low noise, with up to 550,000 m3 / h.

MADE IN ITALY

Engineered and made in Italy

MOTORES EC

Brushless motors with thermic protection and IP65 dust and water resistance.

BMS INTEGRATION

Possibility to integrate in a BMS (Building Management System)

ModelCodeDiameterN of bladesInstalled product weight [kg]Maximum speed [Rpm]Maximum power [W]Air flow [m3/h]
Electrical power supplyCertifications
NORDIK HVLS SUPERBLADE 300/120"61086 (61087 L)3 m585 (94 L)150725280,0001&3 Ph - 200-480 V - 50/60 HzCE
NORDIK HVLS SUPERBLADE 300/120" 110V61085 (61095 L)3 m585 (94 L)1402902700001 Ph 85-264 V - 50/60 HzCE
NORDIK HVLS SUPERBLADE 400/160"61096 (61097 L)4 m591.5 (100.5 L)80370330,0001&3 Ph - 200-480 V - 50/60 HzCE
NORDIK HVLS SUPERBLADE 400/160" 110V
61115 (61125 L)4 m591.5 (100.5 L)80280296,0001 Ph 85-264 V - 50/60 HzCE
NORDIK HVLS SUPERBLADE 500/200"61082 (61092 L)5 m5128 (137 L)80850530,0001&3 Ph - 200-480 V - 50/60 HzCE, ETL
NORDIK HVLS SUPERBLADE 600/240"61083 (61093 L)
6 m5136 (145 L)651100600,0001&3 Ph - 200-480 V - 50/60 HzCE, ETL
NORDIK HVLS SUPERBLADE 700/280" S61076 (61077 L)7 m5155 (164 L)50665850,0001&3 Ph - 200-480 V - 50/60 Hz
CE, ETL

Applications

*Images shown are for illustration purposes only