AIR-TEK PRO

30,000.00

Category:

Description

The AIR-TEK PRO products have a high filtering capacity: the pair of HEPA H14 absolute filters is able to retain pollutants such as pollen, spores, droplets and microparticles, potential vectors of viruses and bacteria, thus significantly limiting the risk of contracting allergies, asthma, respiratory problems and infections. The AIR-TEK PRO products combine mechanical filters with a photocatalysis module to sanitise the treated air flow which eliminates the majority of bacteria, viruses, bad odours, mould and allergens present both in the air and on surfaces.

AIR-TEK PRO for commercial and industrial applications with surfaces up to 100 square meters, equipped with a pair of absolute HEPA H14 filters capable of retaining up to 99.995% of microparticles and a control panel with weekly programming.

 

 

 

 

PURIFYING and SANITISING the air in the home, in the office or in any enclosed spaceis important for a greater well-being of those who live in it.

The simple introduction of fresh air does NOT always bring full benefits: just think of the smog caused by cars, the pollutants generated by domestic heating or released by industries.

Correct ventilation of the rooms with frequent air changes facilitates the removal of pollutants, preventing their accumulation in high concentrations and therefore preserving the well-being of the occupants.

 

 

 

 

 

 

 

FILTERS:
Dual-stage filtering system composed of:
• 2 ISO Coarse 65% (G4) class pre-filters located in correspondence of the intake ports;
• 2 HEPA H14 absolute filters, capable of retaining up to 99.995% of microparticles (equivalent diameter ≤ 0.3 µm).
• The pre-filters, placed in correspondence of the intake ports, retain the macro impurities of the air, protecting the absolute
filters behind them and thus prolonging their life. The actual need for periodic replacement of the filters is indicated on the
control panel on the machine.

 

 

 


Download brochure (English):

Download AIR-TEK PRO User Manual:

 

Download REG FILTER MANUAL:

En Stock

FILTERED AIR

A pair of absolute HEPA H14 filters capable of retaining up to 99.995% of microparticles and a control panel with weekly programming.

PURIFIED AIR

Reduction of microorganisms in the air, thanks to the very high filtering capacity of the pair of HEPA H14 absolute filters, capable of retaining up to 99.995% of microparticles (equivalent diameter 0.3 µm).

SILENCED

Silent operation, guaranteed by the envelope made of sound-absorbing panels.

LOW CONSUMPTION

Reduced consumption, due to high efficiency fans driven by EC motors (brushless).

SIMPLICITY OF MAINTENANCE:

the need to replace the filter is signaled by the control panel. The filters and the photocatalysis module (these only exist in the EVO models) are easily replaceable thanks to the quick release of the panels.

GREAT ROBUSTNESS

As a result of the design and construction solutions adopted, typical of the industrial sector, starting from the casing, which boasts excellent resistance to impact and corrosion.

2 ISO COARSE 65% (G4) CLASS PRE-FILTERS

The pre-filters, placed in correspondence of the intake ports, retain the macro impurities of the air, protecting the absolute
filters behind them and thus prolonging their life. The actual need for periodic replacement of the filters is indicated on the
control panel on the machine.

2 HEPA H14 ABSOLUTE FILTERS

HEPA filters are highly efficient and guarantee the control of large, fine and ultrafine dust particles, allergens and microorganisms.

Photocatalysis-UVC Tower

System that combines the photocatalytic oxidation technique with short-wave ultraviolet light to sterilize the viruses and bacteria previously captured by the filters.

PRODUCTCodeV~50/60HzW maxA maxRPM máxMAX FLOW RATE (m3/h)SUPERFACES UP TO (m2)Lp dB (A) 6m maxTEMP. °C min/maxWEIGHT Kg
AIR-TEK PRO 150 26045120620,7139803004541-25/5030
AIR-TEK PRO 300 26046120951,1236006009044-25/5050

*Images shown are for illustration purposes only